Regency 4734 Manual de instalación descargar pdf (Pagina 63)

Regency

Model 4734 Access Control Expander Installation Manual (P/N 150807, Rev. A) Revised 5/98

Shown below are three examples of programmable I/O statements that can be used on the 4734

to obtain customized status outputs.

EXAMPLE 1: The following statment will cause Terminal 15 on the 4720 to produce an

active low output whenever there is a fire alarm in any area.

TER15 = FIRE

EXAMPLE 2: The following statement will cause Terminal 16 on the 4720 to produce an

active low output whenever there is an intrusion alarm in any area.

TER16 = INTRU

EXAMPLE 3: The following statement will cause the X-10 Module Address #1 from the

first house code to be activated whenever Area #1 (or a non-area system) is in entry or exit

delay. The module could then be used to activate entry lighting. The unit will be deacti-

vated when the entry/exit delay end or the area is disarmed.

X10[1].0 = (AEXIT[1] or AENTRY[1])

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 69 70

Sin comentarios

Regency 4734 Manual de instalación Pagina 63