Regency 4734 Manual de instalación descargar pdf (Pagina 26)

Regency

Model 4734 Access Control Expander Installation Manual (P/N 150807, Rev. A) Revised 5/98

WIN GRP#0:32

Select the time window group (programmed in WINDOW GROUPS, Menu 11) during which

this user profile may be used. To make it possible to use a profile all the time, select ALWAYS

(3 2). To make it impossible to use a profile at any time select NEVER (3 3).

NOTE These options apply to all users using this profile.

EXAMPLE: Suppose you have programmed Time Window #1 for 8:00 AM to 5:00 PM

Monday through Friday, and you have programmed Time Window #2 for 10:00 AM to

5:00 PM on Saturdays (TIME WINDOWS, Menu 0). Then, suppose you have assigned

Windows #1 and #2 to Window Group #4 (WINDOW GROUPS, Menu 11).

If you want the code to be able to gain access and/or use a touchpad during the times from

8:00 AM to 5:00 PM on weekdays, and from 10:00 AM to 5:00 PM on Saturdays, then

select 4 for the WIN GRP option. Any group may be assigned to any profile and to more

than one profile. A profile may be assigned to only one window group.

5.4 Holidays (Menu 3)

Up to 16 calendar days can be designated as holidays. Holidays can be programmed by the

end-user.

DATE#1:01/01

Key in the date (month and day) you want to assign as the first holiday. Use leading zeros

before single-digit data.

DATE#2:01/01

Key in the month and day you want to assign as the second holiday.

5.5 DST Dates (Menu 4)

The daylight savings adjustment dates can be programmed by the end-user. Adjustments occur

at 2:00 AM on the specified date.

FWD DATE:00/00

Key in the month and day when you want the time to be set one hour forward automatically,

for the spring (forward) daylight-savings time adjustment.

BACK DATE:00/00

Key in the month and day when you want the time automatically to be set one hour back, for

the fall (back) daylight-savings time adjustment.

NOTE To disable holidays or DST dates, enter

0 0 / 0 0

for the date.

5.6 System (Menu 5)

DEF/MODE:FORCE (Default Mode)

This option is used to determine what the system will do when it times out of Program Mode or

when power is restored to the panel. This would occur after power has been lost, then restored

to the panel, if no one is present to control the system. Key in the number shown beside the

desired selection in Table 6.

EXAMPLE: All power is lost at the panel (AC and DC). When the power is restored, the

panel will enter the SET TIME Mode. If no action is taken by the user after four minutes,

the panel will enter DEFAULT Mode.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 69 70

Comentarios a estos manuales

Sin comentarios

Regency 4734 Manual de instalación Pagina 26

Comentarios a estos manuales